Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 53 Pa.B. 8238 (December 30, 2023).

Pennsylvania Code



Subchapter B. SMALL QUANTITY HANDLERS OF
UNIVERSAL WASTE


Sec.


266b.10.    Applicability.
266b.11.    Waste management for universal waste oil-based finishes.
266b.12.    Waste management for universal photographic solutions.
266b.29.    Labeling/marking.

§ 266b.10. Applicability.

 In addition to the requirements incorporated by reference, a small quantity handler of universal waste complying with this subchapter is deemed to have a permit for the storage of universal wastes.

§ 266b.11. Waste management for universal waste oil-based finishes.

 A small quantity handler of universal waste oil-based finishes shall manage oil-based finishes, in their original or otherwise appropriate and labeled packaging, in a way that prevents releases of universal waste or a component of a universal waste to the environment, as follows:

   (1)  A small quantity handler of universal waste oil-based finishes shall contain oil-based finishes that show evidence of leakage, spillage or damage that could cause leakage under reasonably foreseeable conditions in a container. The container must be closed, structurally sound, compatible with the oil-based finish and must lack evidence of leakage, spillage or damage that could cause leakage under reasonably foreseeable conditions.

   (2)  A small quantity handler of universal waste may not process oil-based finishes (including opening, blending, filtering, and the like).

Authority

   The provisions of this §  266b.11 amended under sections 105, 402 and 501 of the Solid Waste Management Act (35 P. S. § §  6018.105, 6018.402 and 6018.501); sections 303 and 305(e)(2) of the Hazardous Sites Cleanup Act (35 P. S. § §  6020.303 and 6020.305(e)(2)); section 5, 402 and 501 of The Clean Streams Law (35 P. S. § §  691.5, 691.402 and 691.501); and section 1920-A of The Administrative Code of 1929 (71 P. S. § §  510-20).

Source

   The provisions of this §  266b.11 adopted December 22, 2000, effective December 23, 2000, 30 Pa.B. 6587; amended January 9, 2009, effective January 10, 2009, 39 Pa.B. 201. Immediately preceding text appears at serial pages (272745) to (272746).

§ 266b.12. Waste management for universal waste photographic solutions.

 A small quantity handler of universal waste photographic solutions shall manage waste photographic solutions, in their original or otherwise appropriate and labeled packaging, in a way that prevents releases of universal waste or a component of a universal waste to the environment, as follows:

   (1)  A small quantity handler of universal waste photographic solutions shall manage the photographic solutions in a lidded container. The container must be closed, structurally sound, compatible with the photographic solutions, and must lack evidence of leakage, spillage or damage that could cause leakage under reasonably foreseeable conditions.

   (2)  A small quantity handler of universal waste may not process photographic solutions (for example, including, but not limited to, opening, blending, filtering, and the like).

Authority

   The provisions of this §  266b.12 amended under sections 105, 402 and 501 of the Solid Waste Management Act (35 P. S. § §  6018.105, 6018.402 and 6018.501); sections 303 and 305(e)(2) of the Hazardous Sites Cleanup Act (35 P. S. § §  6020.303 and 6020.305(e)(2)); section 5, 402 and 501 of The Clean Streams Law (35 P. S. § §  691.5, 691.402 and 691.501); and section 1920-A of The Administrative Code of 1929 (71 P. S. § §  510-20).

Source

   The provisions of this §  266b.12 adopted December 22, 2000, effective December 23, 2000, 30 Pa.B. 6587; amended January 9, 2009, effective January 10, 2009, 39 Pa.B. 501. Immediately preceding text appears at serial pages (272746) to (272747).

§ 266b.29. Labeling/marking.

 In addition to the requirements incorporated by reference in 40 CFR 273.14 (relating to labeling/marking), a small quantity handler of universal waste shall label:

   (1)  Each container of universal waste oil-based finish, or the container in which universal waste oil-based finishes are contained, with ‘‘universal waste oil-based finish’’ or ‘‘waste oil-based finish.’’

   (2)  Each container of universal waste photographic solutions, or the container in which universal waste photographic solutions are contained, with ‘‘universal waste photographic solutions’’ or ‘‘waste photographic solutions.’’

Authority

   The provisions of this §  266b.29 amended under sections 105, 402 and 501 of the Solid Waste Management Act (35 P. S. § §  6018.105, 6018.402 and 6018.501); sections 303 and 305(e)(2) of the Hazardous Sites Cleanup Act (35 P. S. § §  6020.303 and 6020.305(e)(2)); section 5, 402 and 501 of The Clean Streams Law (35 P. S. § §  691.5, 691.402 and 691.501); and section 1920-A of The Administrative Code of 1929 (71 P. S. § §  510-20).

Source

   The provisions of this §  266b.29 adopted January 9, 2009, effective January 10, 2009, 39 Pa.B. 201.



No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.