Pennsylvania Code
Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 54 Pa.B. 1032 (February 24, 2024).

34 Pa. Code § 29.68. Piston tool—low velocity type.

LOW VELOCITY TOOLS


§ 29.68. Piston tool—low velocity type.

 This tool utilizes a piston to drive a stud, pin, or fastener into a work surface. When it is used with any commercially available powerload that chambers in the tool and a proper stud, pin, or fastener, the piston does not cause the stud, pin or fastener to have a velocity in excess of 300 feet per second when measured 6 feet 5 inches from the muzzle end of the barrel. This measurement is obtained by use of accepted ballistic test methods. Piston tools of low velocity type shall be so designed that the piston or working element used at the time of discharge or firing remains captive in the tool.


No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.