Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Bulletin website includes the following: Rulemakings by State agencies; Proposed Rulemakings by State agencies; State agency notices; the Governor’s Proclamations and Executive Orders; Actions by the General Assembly; and Statewide and local court rules.

PA Bulletin, Doc. No. 09-368a

[39 Pa.B. 1121]
[Saturday, February 28, 2009]

[Continued from previous Web Page]

PUBLIC WATER SUPPLY (PWS) PERMIT

   Under the Pennsylvania Safe Drinking Water Act (35 P. S. §§ 721.1--721.17), the following parties have applied for a PWS permit to construct or substantially modify a public water system.

   Persons wishing to comment on a permit application are invited to submit a statement to the office listed before the application within 30 days of this public notice. Comments received within the 30-day comment period will be considered in the formulation of the final determinations regarding the application. Comments should include the name, address and telephone number of the writer and a concise statement to inform the Department of Environmental Protection (Department) of the exact basis of a comment and the relevant facts upon which it is based. A public hearing may be held after consideration of comments received during the 30-day public comment period.

   Following the comment period, the Department will make a final determination regarding the proposed permit. Notice of this final determination will be published in the Pennsylvania Bulletin at which time this determination may be appealed to the Environmental Hearing Board.

   The permit application and any related documents are on file at the office listed before the application and are available for public review. Arrangements for inspection and copying information should be made with the office listed before the application.

   Persons with a disability who require an auxiliary aid, service or other accommodations to participate during the 30-day public comment period should contact the office listed before the application. TDD users should contact the Department through the Pennsylvania AT&T Relay Service at (800) 654-5984.

SAFE DRINKING WATER


Applications Received under the Pennsylvania Safe Drinking Water Act

   Southcentral Region: Water Supply Management Program Manager, 909 Elmerton Avenue, Harrisburg, PA 17110.

   Permit No. 3609502, Public Water Supply.

Applicant K & S Group
Municipality East Lampeter Township
County Lancaster
Responsible Official Daniel L. Stoltzfus, Partner
233 Becker Road
Leola, PA 17540
Type of Facility Public Water Supply
Consulting Engineer Charles A. Kehew II, P. E.
James A. Holley & Associates, Inc.
18 South George Street
York, PA 17401
Application Received: January 27, 2009
Description of Action Installation of treatment for removal of radium, gross alpha and manganese.

   Southwest Region: Water Supply Management Program Manager, 400 Waterfront Drive, Pittsburgh, PA 15222-4745.

   Permit No. 0309501, Public Water Supply.

Applicant Buffalo Township Municipal Authority
707 South Pike Road
Sarver, PA 16055-9201
Township or Borough Freeport Borough
Responsible Official Donald Amadee
General Manager
Buffalo Township Municipal Authority
707 South Pike Road
Sarver, PA 16055-9201
Type of Facility Water treatment plant
Consulting Engineer Gibson-Thomas Engineering Co., Inc.
1004 Ligonier Street
P. O. Box 853
Latrobe, PA 15650
Application Received Date February 5, 2009
Description of Action Renovation of the Municipal Authority of Buffalo Township's Freeport filtration plant.

   Permit No. 0409502, Public Water Supply.

Applicant Creswell Heights Joint Authority
3961 South Jordan Street
Box 301
South Heights, PA 15081
Township or Borough Freeport Borough
Responsible Official George McElhanney
General Manager
Creswell Heights Joint Authority
3961 South Jordan Street
Box 301
South Heights, PA 15081
Type of Facility Water treatment plant
Consulting Engineer Rabosky & Associates, Inc.
104 Wynview Drive
Moon Township, PA 15108
Application Received Date February 3, 2009
Description of Action Construction of replacement Well No. 7.

   Permit No. 0209502, Public Water Supply.

Applicant Municipal Authority of the Borough of West View
210 Perry Highway
Pittsburgh, PA 15229
Township or Borough Neville Township
Responsible Official Joseph Dinkel
Executive Director
Municipal Authority of the Borough of West View
210 Perry Highway
Pittsburgh, PA 15229
Type of Facility Water treatment plant
Consulting Engineer Bankson Engineers, Inc.
267 Blue Run Road
P. O. Box 200
Indianola, PA 15051
Application Received Date February 2, 2009
Description of Action Construction of an anhydrous ammonia feed system (chloramination) at the existing water treatment plant.

   Northwest Region: Water Supply Management Program Manager, 230 Chestnut Street, Meadville, PA 16335-3481.

   Application No. 2509501, Public Water Supply.

Applicant Erie City Water Works
Township or Borough McKean Township
Erie County
Responsible Official Craig Palmer
Engineering Services Manager
Consulting Engineer Keith R. Straight, P. E.
Project Engineer
KLH Engineers, Inc.
5173 Campbells Run Road
Pittsburgh, PA 15205
Application Received Date February 9, 2009
Description of Action Installation of sodium hyprchlorite feed system at existing meter vault.

   Application No. 3709501, Public Water Supply.

Applicant Volant Borough
Township or Borough Volant Borough
Lawrence County
Responsible Official Carmen Gates
Borough Secretary
Consulting Engineer Thomas L. Thompson, P. E.
Senior Project Manager
Gannett Fleming, Inc.
554 South Erie Street
Mercer, PA 16137
Application Received Date February 10, 2009
Description of Action Construction of 72,000 gallon water treatment plant, and 4,000 LF waterline.

MINOR AMENDMENT

   Southwest Region: Water Supply Management Program Manager, 400 Waterfront Drive, Pittsburgh, PA 15222-4745.

   Application No. 5609501MA, Minor Amendment.

Applicant Borough of Somerset
340 West Union Street
Somerset, PA 15501
Township or Borough Somerset Borough
Responsible Official Benedict Vinzani, Jr.
Manager
Borough of Somerset
340 West Union Street
Somerset, PA 15501
Type of Facility State Hospital water storage tank
Consulting Engineer The EADS Group, Inc.
450 Aberdeen Drive
Somerset, PA 15501
Application Received Date February 5, 2009
Description of Action Demolition of an existing 1.0 mg water storage tank and construction of the new 1.0 mg State Hospital water storage tank.

LAND RECYCLING AND ENVIRONMENTAL REMEDIATION

UNDER ACT 2, 1995

PREAMBLE 1


Acknowledgment of Notices of Intent to Remediate Submitted under the Land Recycling and Environmental Remediation Standards Act (35 P. S. §§ 6026.101--6026.908).

   Sections 302--305 of the Land Recycling and Environmental Remediation Standards Act (act) require the Department of Environmental Protection (Department) to publish in the Pennsylvania Bulletin an acknowledgment noting receipt of Notices of Intent to Remediate. An acknowledgment of the receipt of a Notice of Intent to Remediate is used to identify a site where a person proposes to, or has been required to, respond to a release of a regulated substance at a site. Persons intending to use the Background Standard, Statewide Health Standard, the Site-Specific Standard or who intend to remediate a site as a special industrial area must file a Notice of Intent to Remediate with the Department. A Notice of Intent to Remediate filed with the Department provides a brief description of the location of the site, a list of known or suspected contaminants at the site, the proposed remediation measures for the site and a description of the intended future use of the site. A person who demonstrates attainment of one, a combination of the cleanup standards or who receives approval of a special industrial area remediation identified under the act will be relieved of further liability for the remediation of the site for any contamination identified in reports submitted to and approved by the Department. Furthermore, the person shall not be subject to citizen suits or other contribution actions brought by responsible persons not participating in the remediation.

   Under sections 304(n)(1)(ii) and 305(c)(2) of the act, there is a 30-day public and municipal comment period for sites proposed for remediation using a Site-Specific Standard, in whole or in part, and for sites remediated as a special industrial area. This period begins when a summary of the Notice of Intent to Remediate is published in a newspaper of general circulation in the area of the site. For the sites identified, proposed for remediation to a Site-Specific Standard or as a special industrial area, the municipality within which the site is located may request to be involved in the development of the remediation and reuse plans for the site if the request is made within 30 days of the date specified. During this comment period, the municipality may request that the person identified as the remediator of the site develop and implement a public involvement plan. Requests to be involved and comments should be directed to the remediator of the site.

   For further information concerning the content of a Notice of Intent to Remediate, contact the environmental cleanup program manager in the Department regional office before which the notice appears. If information concerning this acknowledgment is required in an alternative form, contact the community relations coordinator at the appropriate regional office. TDD users may telephone the Department through the Pennsylvania AT&T Relay Service at (800) 654-5984.

   The Department has received the following Notices of Intent to Remediate:

   Northeast Region: Ronald S. Brezinski, Environmental Cleanup Program Manager, 2 Public Square, Wilkes-Barre, PA 18711-0790.

   Reedy Property, 43 King Fisher Drive, Barry Township, Schuylkill County. David Crowther, BlackRock Environmental, LLC, P. O. Box 288, Nazareth, PA 18064 has submitted a Notice of Intent to Remediate (on behalf of his client, Lawrence Reedy, 43 King Fisher Drive, Ashland, PA 17921), concerning the remediation of soils, groundwater and surface water found to have been impacted by kerosene as a result of an accidental release from a 275-gallon aboveground storage tank. The applicant proposes to remediate the site to meet the Statewide Health Standard. The future use of the property will be residential. A summary of the Notice of Intent to Remediate is expected to be published in a local newspaper serving the general area sometime in the near future.

   Southcentral Region: Environmental Cleanup Program Manager, 909 Elmerton Avenue, Harrisburg, PA 17110.

   Maiden Creek Motel, Greenwich Township, Berks County. Liberty Environmental, Inc., 50 North Fifth Street, 5th Floor, Reading, PA 19601 on behalf of Effective Services, LLC, 3215 Stein Lane, Lewisburg, PA 17837, submitted a Notice of Intent to Remediate site soils and groundwater contaminated with leaded gasoline released from an underground tank. The motel and former gas station will continue to operate as a motel. The site will be remediated to the Residential Statewide Health Standard.

   Former Pinto Tract, South Middleton Township, Cumberland County. Alternative Environmental Solutions, Inc., 480 New Holland Avenue, Suite 8203, Lancaster, PA 17602, on behalf of LIT Industrial Limited Partnership, 2650 Cedar Springs Road, Suite 850, Dallas, TX 75201, submitted a Notice of Intent to Remediate groundwater contaminated with chlorinated solvents. The property is residential but will be developed for commercial use. The site will be remediated to the Site-Specific Standard.

DETERMINATION FOR APPLICABILITY FOR MUNICIPAL WASTE GENERAL PERMITS


Application for Determination of Applicability for General Permit Received under the Solid Waste Management Act (35 P. S. §§ 6018.101--6018.1003); the Municipal Waste Planning, Recycling and Waste Reduction Act (53 P. S. §§ 4000.101--4000.1904); and Municipal Waste Regulations for a General Permit to Operate Municipal Waste Processing Facilities and/or the Beneficial Use of Municipal Waste.

   Southeast Region: Regional Solid Waste Manager, 2 East Main Street, Norristown, PA 19401.

   General Permit Application No. WMGM025SE 001A. Accurate Recycling Corporation, 508 East Baltimore Pike, Lansdowne, PA 19050. This permit application is for Determination of Applicability (DOA) under General Permit WMGM025. General Permit WMGM025SE001A is for the beneficial use of construction waste from new residential and commercial construction sites at Accurate Recycling Corporation Lansdowne Facility located at 508 East Baltimore Pike, Lansdowne, PA 19050, Lansdowne Borough, Delaware County. The application for DOA was determined to be administratively complete by the Southeast Regional Office on February, 17, 2009.

DETERMINATION OF APPLICABILITY FOR RESIDUAL WASTE GENERAL PERMITS


Application for Determination of Applicability Received under the Solid Waste Management Act (35 P. S. §§ 6018.101--6018.1003); the Municipal Waste Planning, Recycling and Waste Reduction Act (53 P. S. §§ 4000.101--4000.1904); and Residual Waste Regulations for a General Permit to Operate Residual Waste Processing Facilities and/or the Beneficial Use of Residual Waste Other Than Coal Ash.

   South Central Regional Office: Waste Management Program, 909 Elmerton Avenue, Harrisburg, PA 17110-8200.

   The Southcentral Regional Office, Waste Management Program has received an application for a Determination of Applicability (DOA) under Residual Waste General Permit WMGR019 for Frush Valley Holdings, LLC located at the former Empire Steel Castings, Inc. Facility, 1501 Frush Valley Road, Muhlenberg, PA 19605. This General Permit is for the beneficial use of waste foundry sand as an aggregate in road construction and concrete building material. The application for DOA was determined to be administratively complete by the Southcentral Regional Office on February 17, 2009.

   Persons interested in reviewing the general permit may contact John Oren, Facilities Manager, Waste Management Program, 909 Elmerton Avenue, Harrisburg, PA 17110, (717) 705-4706. TDD users may contact the Department of Environmental Protection through the Pennsylvania AT&T Relay Service, (800) 654-5984.

AIR QUALITY

PLAN APPROVAL AND OPERATING PERMIT APPLICATIONS

NEW SOURCES AND MODIFICATIONS

   The Department of Environmental Protection (Department) has developed an ''integrated'' plan approval, State operating permit and Title V operating permit program. This integrated approach is designed to make the permitting process more efficient for the Department, the regulated community and the public. This approach allows the owner or operator of a facility to complete and submit all the permitting documents relevant to its application one time, affords an opportunity for public input and provides for sequential issuance of the necessary permits.

   The Department has received applications for plan approvals and/or operating permits from the following facilities.

   Copies of the applications, subsequently prepared draft permits, review summaries and other support materials are available for review in the regional office identified in this notice. Persons interested in reviewing the application files should contact the appropriate regional office to schedule an appointment.

   Persons wishing to receive a copy of a proposed plan approval or operating permit must indicate their interest to the Department regional office within 30 days of the date of this notice and must file protests or comments on a proposed plan approval or operating permit within 30 days of the Department providing a copy of the proposed document to that person or within 30 days of its publication in the Pennsylvania Bulletin, whichever comes first. Interested persons may also request that a hearing be held concerning the proposed plan approval and operating permit. Comments or protests filed with the Department regional offices must include a concise statement of the objections to the issuance of the Plan approval or operating permit and relevant facts which serve as the basis for the objections. If the Department schedules a hearing, a notice will be published in the Pennsylvania Bulletin at least 30 days prior the date of the hearing.

   Persons with a disability who wish to comment and require an auxiliary aid, service or other accommodation to participate should contact the regional office identified before the application. TDD users should contact the Department through the Pennsylvania AT&T Relay Service at (800) 654-5984.

   Final plan approvals and operating permits will contain terms and conditions to ensure that the source is constructed and operating in compliance with applicable requirements in 25 Pa. Code Chapters 121--143, the Federal Clean Air Act (act) and regulations adopted under the act.

PLAN APPROVALS


Plan Approval Applications Received under the Air Pollution Control Act (35 P. S. §§ 4001--4015) and 25 Pa. Code Chapter 127, Subchapter B that may have special public interest. These applications are in review and no decision on disposition has been reached.

   Southwest Region: Air Quality Program, 400 Waterfront Drive, Pittsburgh, PA 15222-4745, M. Gorog and B. Hatch, Environmental Engineer Managers, (412) 442-4163/5226.

   30-00077C: Texas Eastern Transmission, LP, (P. O. Box 1642, Houston, TX 77251-1642) for installation of a Solar Mars 100-150002S III turbine and abandonment of an Ingersoll-Rand KVS-412 internal combustion engine at the Holbrook Compressor Station located in Richhill Township, Greene County. This is a Title V facility.

   03-00244: Dominion Transmission, Inc. (445 West Main Street, Clarksburg, PA 26301) for installation of compressor station in Valley Township, Armstrong County.


Intent to Issue Plan Approvals and Intent to Issue or Amend Operating Permits under the Air Pollution Control Act (35 P. S. §§ 4001--4015) and 25 Pa. Code Chapter 127, Subchapter B. These actions may include the administrative amendments of an associated operating permit.

   Northeast Region: Air Quality Program, 2 Public Square, Wilkes-Barre, PA 18711-0790, Ray Kempa, New Source Review Chief, (570) 826-2507.

   48-399-060: Steel Management Systems, LLC (3045 Bath Pike, Nazareth, PA 18064) for construction and operation of a shot blast machine and baghouse at their facility in Upper Nazareth Township, Northampton County. This facility is a Title V facility. The company will install the shot blast machine with a baghouse to control emission into the atmosphere. The sources main emission is PM. The plan approval will include all appropriate testing, monitoring, recordkeeping and reporting requirements designed to keep the operations within all applicable air quality requirements.

   Northcentral Region: Air Quality Program, 208 West Third Street, Williamsport, PA 17701, David Aldenderfer, Program Manager, (570) 327-3637.

   17-00020A: Glenn O. Hawbaker, Inc. (711 East College Avenue, Bellefonte, PA 16823) to replace: 1) the existing 300 tph asphalt drying drum mixer with a new 400 tph asphalt drying drum mixer; 2) the existing 93 mmBtu/hr dryer/mixer burner and associated burner blower with a 120 mmBtu/hr burner and associated burner blower; 3) the existing dust silo with a 1,000-barrel dust silo; 4) the existing knock-out box with a new knock-out box; 5) the existing exhaust fan associated with the existing fabric collector with an equivalent exhaust fan; and 6) the existing 4` by 8` double deck screen with a 5` by 12` double deck screen. This plan approval authorizes the use of waste asphalt shingles in the hot mix asphalt, process a combination of RAP and/or asphalt shingles at a rate not to exceed 40% of the total weight of all materials charged into the drum at any time, and to use recycled/reprocessed oil as fuel in the dryer/mixer burner. This plan approval also authorizes the construction of a recycled asphalt pavement (RAP) material handling system that includes seven conveyors, lengthening one conveyor, two single deck screens, one crusher and one bin. Additionally, this plan approval authorizes the construction of a portable stone crushing and screening plant and associated 400 horsepower diesel engine, construction of a portable stone crushing plant and associated 440 horsepower diesel engine, and the construction of a portable stone screening plant and associated 100 horsepower diesel engine at the Dubois facility (Plant No. 4) in Sandy Township, Clearfield County.

   The portable stone crushing and screening plant will be equipped with a water spray dust suppression system for fugitive dust control. The air contaminant emissions from this plant will not exceed 0.4 ton of PM/PM10, 0.47 ton of NOx, 0.12 ton of CO, 0.16 ton of SOx and 0.03 ton of nonmethane hydrocarbons per year. The portable stone crushing plant will be equipped with a water spray dust suppression system for fugitive dust control. The air contaminant emissions from this plant will not exceed 0.07 ton of PM/PM10, 0.77 ton of NOx, 0.21 ton of CO, 0.17 ton of SOx and 0.04 ton of nonmethane hydrocarbons per year. The air contaminant emissions from the portable stone screening plant will not exceed 0.08 ton of PM/PM10, 0.21 ton of NOx, 0.02 ton of CO, 0.08 ton of SOx and zero nonmethane hydrocarbons per year. The 1,000-barrel dust storage silo and associated truck loadout spout will be ducted to an existing fabric collector for PM control. The recycled asphalt pavement bin, crusher, screens and conveyors will not be equipped with any air cleaning device due to the low associated PM emission potential. The emission of PM from the bin, crusher, screens and conveyors will be minimal.

   The Department of Environmental Protection's (Department) review of the information submitted by Glenn O. Hawbaker, Inc. indicates that the air contamination sources to be constructed will comply will all regulatory requirements pertaining to air contamination sources and the emission of air contaminants including the fugitive air contaminant emission requirements of 25 Pa. Code § 123.1, 40 CFR 60.90--60.93, 40 CFR 60.670--60.676, and the BAT requirement of 25 Pa. Code §§ 127.1 and 127.12. Based on this finding, the Department proposes to issue a plan approval for the proposed modifications and construction.

   The following is a summary of the conditions the Department proposes to place in the plan approval to be issued to ensure compliance with all applicable regulatory requirements:

   1.  Under 25 Pa. Code § 127.441, conditions contained in State-only Operating Permit 17-00020 remain in effect unless amended or superseded by a condition contained herein. If there is a conflict between a condition contained herein and a condition contained in State-only Operating Permit 17-00020, the permittee shall comply with the condition contained herein rather than with the conflicting condition contained in State-only Operating Permit 17-00020.

   2.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, open top trucks loaded with dust from the dust storage silo truck loadout spout shall be tarped, or otherwise covered, during loading and/or the loadout spout shall be monitored and adjusted as necessary during loading such that the bottom of the spout is as close to the top of the material in the truckbed at all times as is reasonably possible. Following the completion of loading, all open top trucks shall be tarped, or otherwise covered, before being moved from the silo area.

   3.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the portable stone crushing and screening plant shall be equipped with a water spray dust suppression system incorporating spray nozzles at the inlet and outlet of the crusher, the inlet of the screen and the discharge of the product conveyor. The water spray dust suppression system shall be connected to an ondemand water source capable of delivering an adequate supply of water at any time the respective plant is in use. The water spray dust suppression system shall also be equipped with strainers to prevent nozzle plugging. If the water source cannot deliver an adequate supply of water to properly operate the water spray dust suppression system or if the water spray dust suppression system is incapable of operation due to weather conditions or any other reason, the portable stone crushing and screening plant shall not be operated.

   4.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the diesel engine and the portable stone crushing and screening plant shall not operate more than 400 hours in any 12-consecutive month period nor shall it emit more than 2.68 grams of NOx per brake horsepower-hour, 0.67 gram of CO per brake horsepower-hour, 0.93 gram of SOx per brake horsepower-hour, 0.07 gram of PM per brake horsepower-hour, and 0.15 gram of nonmethane hydrocarbons per brake horsepower-hour nor shall it emit more than 2.37 pounds of NOx per hour, 0.59 pound of CO per hour, 0.82 pound of SOx per hour, 0.07 pound of PM per hour, and 0.13 pound of nonmethane hydrocarbons per hour.

   5.  Under 40 CFR 60.670--60.676, the portable stone crushing and screening plant shall comply with all applicable requirements specified in Subpart OOO of the Federal Standards of Performance for New Stationary Sources, 40 CFR Part 60.670--60.676 at all times.

   6.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the portable stone crushing plant shall be equipped with a water spray dust suppression system incorporating spray nozzles at the inlet and outlet of the crusher and the discharge of the under-crusher conveyor. The water spray dust suppression system shall be connected to an ondemand water source capable of delivering an adequate supply of water at any time the respective plant is in use. The water spray dust suppression system shall also be equipped with strainers to prevent nozzle plugging. If the water source cannot deliver an adequate supply of water to properly operate the water spray dust suppression system or if the water spray dust suppression system is incapable of operation due to weather conditions or any other reason, the portable stone crushing and screening plant shall not be operated.

   7.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the diesel engine and the portable stone crushing plant shall not operate more than 400 hours in any 12-consecutive month period nor shall it emit more than a combined total of 4.10 grams of NOx and nonmethane hydrocarbons per bhp/hr, 1.10 grams of CO per bhp/hr, 0.93 gram of SOx per bhp/hr, and 0.11 gram of PM per bhp/hr nor shall it emit more than 3.84 pounds of NOx per hour, 1.03 pounds of CO per hour, 0.87 pound of SOx per hour, and 0.10 pound of PM per hour.

   8.  Under 40 CFR 60.670--60.676, the portable stone crushing plant shall comply with all applicable requirements specified in Subpart OOO of the Federal Standards of Performance for New Stationary Sources, 40 CFR Part 60.670--60.676 at all times.

   9.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the material to be processed by the portable stone screening plant shall be thoroughly wetted prior to being processed to prevent fugitive emissions in violation of the applicable standards.

   10.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the diesel engine and the portable stone screening plant shall not operate more than 400 hours in any 12-consecutive month period nor shall it emit more than 4.71 grams of NOx per bhp/hr, 0.45 gram of CO per bhp/hr, 1.72 grams of SOx per bhp/hr, 0.18 gram of PM per bhp/hr, and 0.13 gram of nonmethane hydrocarbons per bhp/hr nor shall it emit more than 1.04 pounds of NOx per hour, 0.10 pound of CO per hour, 0.38 pound of SOx per hour, 0.04 pound of PM per hour, and 0.03 pound of nonmethane hydrocarbons per hour.

   11.  Under 40 CFR 60.670--60.676, the portable stone screening plant shall comply with all applicable requirements specified in Subpart OOO of the Federal Standards of Performance for New Stationary Sources, 40 CFR Part 60.670--60.676 at all times.

   12.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, no more than 1,000,000 tons of asphalt concrete shall be produced at this facility in any 12-consecutive month period.

   13.  Records shall be maintained of the number of hours each of the diesel engines and the portable stone crushing and screening plant, portable stone crushing plant, and portable stone screening plant operated each month.

   14.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the emission of NOx, CO and VOCs from the asphalt plant shall not exceed 0.054, 0.108 and 0.033 pound per ton of asphalt concrete produced, respectively, nor shall they exceed 21.6, 43.2 and 13.2 pounds per hour, respectively.

   15.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the emission of PM from the asphalt plant shall not exceed 0.01 gr/dscf of effluent gas volume.

   16.  The permittee shall perform stack testing on the asphalt plant sometime between April 1, 2009, and September 30, 2010, to determine its NOx, CO, VOC and PM emission rates.

   17.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, following the completion of the modifications and construction approved herein, the total combined emission of NOx from all sources existing at this facility shall not exceed 29.3 tons in any 12-consecutive month period, the total combined emission of CO shall not exceed 54.97 tons in any 12-consecutive month period, the total combined emission of SOx shall not exceed 76.35 tons in any 12-consecutive month period, the total combined emission of VOCs shall not exceed 16.97 tons in any 12-consecutive month period, the total combined emission of PM/PM10 shall not exceed 62.51 tons in any 12-consecutive month period.

   A copy of the plan approval application is available for public review between 8 a.m. and 4 p.m. at the Department's Northcentral Regional Office, 208 West Third Street, Suite 101, Williamsport, PA 17701. Appointments for scheduling a review may be made by calling the Department at (570) 327-3693. Written comments or requests for a public hearing should be directed to Muhammad Q. Zaman, Manager, Facilities Permitting Section, Department of Environmental Protection, Air Quality Program, Northcentral Regional Office, 208 West Third Street, Suite 101, Williamsport, PA 17701, (570) 327-0512.

   08-00002D: E.I. DuPont de Nemours and Company, Inc. (Patterson Boulevard, Towanda, PA 18848) has submitted an application (No. 08-00002D) to utilize an existing regenerative thermal oxidizer (Control Device C159) to control the air contaminant emissions from Source IDs P142, P150 and P159 at their Towanda facility located in North Towanda Township, Bradford County. The respective facility is a major facility for which a Title V operating permit 08-00002 has been issued.

   The Department of Environmental Protection's (Department) review of the information submitted by E.I. DuPont de Nemours and Company, Inc. indicates that the installation satisfies all applicable air quality regulatory requirements pertaining to air contamination sources and the emission of air contaminants. Based on these findings, the Department intends issue plan approval. Additionally, if the Department determines that the air contaminant sources and control device are operating in compliance with all plan approval conditions, the conditions established in the plan approval will be incorporated into Title V operating permit No. 08-00002 by means of an administrative amendment under 25 Pa. Code § 127.450.

   The following is a summary of the conditions that the Department proposes to place in the plan approval to be issued to ensure compliance with all applicable regulatory requirements:

   1.  The conditions as specified in Title V operating permit No. 08-00002 for Source IDs P142, P150, P159 and Control Device C159 shall remain in effect unless superseded or amend by a condition contained herein. If there is a conflict between a condition contained in the Title V operating permit No. 08-00002 and a condition contained herein, the permittee shall comply with the condition contained herein rather than the conflicting condition contained in the Title V operating permit No. 08-00002.

   2.  Under 25 Pa. Code § 127.12b, Source IDs P142, P150 and P150 shall be equipped with instrumentation to monitor the exhaust gas from each source on a continuous basis as well as interlocks to prevent the operation of any one of these sources if the total combined exhaust gas flow rate to Control Device C159 is in excess of 66,500 SCFM.

   3.  Under 25 Pa. Code § 127.12b, Source IDs P142, P150 and P159 shall be equipped with fail safe switches or interlocks which shall shut down the respective source if the inlet exhaust gas flow rate to Control Device C159 is in excess of 66,500 SCFM.

   4.  Under 25 Pa. Code § 127.12b, the capture efficiency of the VOC capture system associated with Source IDs P142, P150 and P159 shall be 100%. The VOCs captured shall be ducted to Control Device C159. The VOC destruction efficiency of Control Device C159 shall be equal to, or greater than, 98% at all times.

   5.  Under 25 Pa. Code § 127.12b, Source IDs P142, P150 and P159 shall not be operated, at any time, without the simultaneous operation of Control Device C159.

   6.  Under 25 Pa. Code § 127.12b, within 120 days from completion of the modification to Source IDs P142, P150 and P159 to be controlled by Control Device C159, the permittee shall perform simultaneous stack testing (consisting of three runs) on the inlet and outlet of Control Device C159 to determine its VOC destruction efficiency. The testing is to be performed using reference method test procedures acceptable to the Department while operating Source IDs P142, P150 and P159 and Control Device C159 under normal operating conditions.

   A copy of the plan approval application is available for public review between 8 a.m. and 4 p.m. at the Department's Northcentral Regional Office, 208 West Third Street, Suite 101, Williamsport, PA 17701. Appointments for scheduling a review may be made by calling the Department at (570) 327-3693. Written comments or requests for a public hearing should be directed to Muhammad Q. Zaman, Manager, Facilities Permitting Section, Department of Environmental Protection, Air Quality Program, Northcentral Regional Office, 208 West Third Street, Suite 101, Williamsport, PA 17701, (570) 327-0512.

   14-00014D: Glenn O. Hawbaker, Inc. (711 College Avenue, Bellefonte, PA 16823) for construction of a mineral filler storage silo and associated bulk truck loadout spout, a 100 tph RAP crusher, two RAP screens, a 400 tph cone crusher, various conveyors, feeders and bins, three 200 ton storage silos, a 4,200,000 gallon liquid asphalt storage tank, a portable crushing plant and associated diesel engine, two water pumps and associated diesel engines at their quarry in Spring Township, Centre County. The plan approval application also proposes to modify an aggregate unloading operation to authorize the loading of aggregate into railcars and to modify the Kolberg and the Warrior portable plants to limit each of their hours of operation to 2,000 hours per year. The facility is a State-only facility.

   The Department of Environmental Protection's (Department) review of the information contained in the application submitted by Glenn O. Hawbaker indicates that the sources and their associated air-cleaning devices will comply with all applicable air quality requirements pertaining to air contamination sources and the emission of air contaminants, including the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the fugitive air contaminant emission requirement of 25 Pa. Code § 123.1, the PM emission limitation of 25 Pa. Code § 123.13, the SOx emission limitation of 25 Pa. Code § 123.21 and the visible emission limitation of 25 Pa. Code § 123.41, as well as the requirements of Subpart I of the Federal Standards of Performance for Hot Mix Asphalt Facilities, 40 CFR 60.90--60.93, Subpart Kb of the Federal Standards of Performance for Volatile Organic Liquid Storage Vessels for Which Construction Commenced after July 23, 1984, 40 CFR 60.110b--60.117b, Subpart OOO of the Federal Standards of Performance for Nonmetallic Mineral Processing Plants, 40 CFR 60.670--60.676 and 40 CFR Part 89. The plan approval, if issued, will subsequently be incorporated in an operating permit by means of an administrative amendment in accordance with 25 Pa. Code § 127.450 at a later date.

   Based upon this finding, the Department proposes to issue plan approval for the construction of a 1,000 barrel mineral filler storage silo and associated bulk truck loadout spout, a 100 tph RAP crusher, two RAP screens, a 400 tph cone crusher, various conveyors, feeders and bins, three 200 ton storage silos, a 4,200,000 gallon liquid asphalt storage tank, a portable crushing plant and associated 425 horsepower diesel engine, a 3,200 gpm water pump and associated 105 horsepower diesel engine and a 3,200 gpm water pump and associated 115 horsepower diesel engine, and the modification of an aggregate unloading operation to authorize the loading of aggregate into railcars and the modification of the Kolberg and the Warrior portable plants to limit each of their hours of operation to 2,000 hours per year. The following is a summary of the conditions the Department proposes to place in the plan approval to be issued to ensure compliance with all applicable regulatory requirements:

   1.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, material shall not be transferred into, or removed from, the mineral filler storage silo incorporated in the asphalt concrete plant (Source P101) unless the Amerex RP-10-800 D6 fabric collector (Control Device C101) controlling the silo and associated loadout spout is operating.

   2.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the mineral filler storage silo incorporated in the asphalt concrete plant (Source P101) shall not be vented to the atmosphere other than through Control Device C101. Additionally, material shall not be removed from this silo other than by introduction back into the mixing drum of the asphalt concrete plant or by unloading by means of the bulk loading spout into an enclosed or covered bulk solids truck.

   3.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, all open-topped trucks hauling dust from the mineral filler storage silo incorporated in the asphalt concrete plant (Source P101) shall have their loads securely tarped and a sign or signs stating the existence of this requirement shall be posted in a prominent location near the storage silo.

   4.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the recycled asphalt pavement (RAP) processing system associated with the asphalt concrete plant (Source P101) shall process RAP material only.

   5.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, Source P101 is a 500 tph CMI Corporation SVM 2,500 drum mix asphalt concrete plant incorporating a Maxum Solo counter-flow drum and an associated pneumatic dust handling system, mineral filler silo and DCL bulk truck loadout spout, the air contaminant emissions from all of which shall be controlled by an Amerex RP-10-800 D6 pulse jet fabric collector (Control Device C101). Source P101 also includes a recycled asphalt pavement (RAP) processing system which incorporates a Telsmith 3036 HIS RAP crusher, a 10` by 16` RAP bin with associated 30" belt feeder, a 4` by 8` single deck screen, a high frequency 6` by 18` single deck screen, a 36" belt conveyor, four 30" belt conveyors and a 24" belt conveyor. Source P101 also incorporates a 33,000 gallon fuel oil storage tank, as well as two 10` by 14` aggregate storage bins with associated 30" belt conveyors, four 10` by 14` RAP bins with associated belt feeders and two 30" belt conveyors.

   6.  The mineral filler storage silo, the four 10` by 14` RAP bins, the associated 30" feeder conveyors and the two 30" by 150` belt conveyors incorporated in the asphalt concrete plant (Source P101) shall comply with all requirements specified in Subpart I of the Federal Standards of Performance for New Stationary Sources, 40 CFR 60.90--60.93. The permittee shall comply with all applicable requirements of this Subpart as well as any other applicable Subpart of the Standards of Performance.

   7.  The RAP crusher and associated discharge bin, the RAP screens and all belt conveyors up to, but not including, the four 10` by 14` RAP bins and subsequent conveyors incorporated in the recycled asphalt pavement (RAP) processing system associated with the asphalt concrete (Source P101) shall comply with all requirements specified in Subpart OOO of the Federal Standards of Performance for New Stationary Sources, 40 CFR 60.670--60.676. The permittee shall comply with all applicable requirements of this Subpart as well as any other applicable Subpart of the Standards of Performance.

   8.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the only material which may be processed by the Metso/Nordberg cone crusher incorporated in the primary crushing operation (Source P102) shall be material to which sufficient water has first been applied in a wet screen to render the material dust free.

   9.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, Source ID P102 is a primary crushing operation for limestone consisting of the following equipment:

   (a)  600 tph Hazemag 1620/QL impact crusher--ID No. 100-008.

   (b)  62" by 24` Simplicity vibrating feeder--ID No. 134-018.

   (c)  6` by 12` Simplicity double deck scalping screen--ID No. 111-024.

   (d)  Simplicity 8` by 16` triple deck screen--ID No. 111-007.

   (e)  30" by 100` radial stacking conveyor (GOH)--ID No. 123-019.

   (f)  30" by 115` radial stacking conveyor (GOH)--ID No. 123-003.

   (g)  42" by 120` truss conveyor (GOH)--ID No. 122-032.

   (h)  36" by 170` truss conveyor (Barber-Greene)--ID No. 122-002.

   (i)  42" by 8` Steel Systems forward/reversing channel frame conveyor--ID No. 120-077.

   (j)  30" by 125` ABBCO truss frame conveyor--ID No. 122-048.

   (k)  60" by 32` Steel Systems channel frame conveyor--ID No. 120-078.

   (l)  30" by 150` 2RC transfer conveyor--ID No. 120-004.

   (m)  42` by 12` undersize transfer conveyor--ID No. 120-099.

   (n)  30" by 325` ABBCO/equal transfer conveyor No. 3--ID No. 122-047.

   (o)  44" by 20` McLanahan aggregate conditioner--ID No. 125-044.

   (p)  8` by 20` Simplicity triple deck screen--ID No. 111-037.

   (q)  10` by 32` McLanahan sand tank--ID No. 242-019.

   (r)  44" by 33` McLanahan fine material screw--ID No. 125-043.

   (s)  30" by 25` Eagle fine material screw--ID No. 125-041.

   (t)  24" by 100` GOH/equal sand No. 1 stacker--ID No. 123-017.

   (u)  24" by 100` Mellott Enterprises, Inc. sand stacker--ID No. 123-051.

   (v)  24" by 365` Mellott Enterprises, Inc. 2B transfer conveyor--ID No. 122-042.

   (w)  24" by 100` Mellott Enterprises, Inc. 2B stacker--ID No. 123-042.

   (x)  24" by 170` Mellott Enterprises, Inc. 1B transfer conveyor--ID No. 122-041.

   (y)  24" by 100` Mellott Enterprises, Inc. 1B stacker--ID No. 123-043.

   (z)  400 tph Metso/Nordberg HP400 cone crusher (no ID).

   (aa)  24" by 125`-6" channel/truss frame conveyor--ID No. 122-051.

   (bb)  30" by 155 truss frame conveyor--ID No. 122-052.

   (cc)  30" by 120 Dover truss frame conveyor--ID No. 122-064.

   (dd)  Universal vibrating feeder (no ID).

   (ee)  42" by 30` channel frame belt conveyor (no ID).

   (ff)  30" by 210` truss frame belt conveyor (no ID).

   (gg)  30" by 210` truss/channel belt conveyor (no ID).

   (hh)  36" by 12` belt feeder (no ID).

   (ii)  42" by 110` truss frame conveyor (no ID).

   (jj) 42" by 310` truss conveyor (no ID).

   (kk)  42" by 410` truss/channel belt conveyor (no ID).

   The air contaminant emissions from Source P102 shall be controlled by a water spray dust suppression system (Control Device C01) incorporating the following spray nozzles:

   (a)  3 spray nozzles located at the inlet of the Simplicity 62" by 24` feeder (ID No. 134-018).

   (b)  2 spray nozzles located at the discharge of the Hazemag 1620/QL impact crusher (ID No. 100-008).

   (c)  1 spray nozzle located at the discharge of the Steel Systems 42" by 8` forward/reversing channel frame conveyor (ID No. 120-077).

   (d)  2 spray nozzles located at the discharge of the Steel Systems 60" by 32` channel frame conveyor (ID No. 120-078).

   (e)  2 spray nozzles located at the discharge of the 42" by 120` truss conveyor (ID No. 122-032).

   (f)  1 spray nozzle located at the discharge of the 42" by 12` channel conveyor (ID No. 120-099).

   (g)  1 spray nozzle located at the discharge of the 30" by 76` 2RC to wash conveyor (ID No. 122-025).

   (h)  1 spray nozzle located at the discharge of the 30" by 100` ABBCO/equal 2 RC stacker (ID No. 123-050).

   (i)  2 spray nozzles located at the discharge of the (ee) 42" by 300` channel frame conveyor (no ID).

   (j)  2 spray nozzles located at the discharge of the (ff) 30" by 210` truss frame conveyor (no ID).

   (k)  2 spray nozzles located at the discharge of the (ii) 42" by 110` truss frame conveyor (no ID).

   (l)  2 spray nozzles located at the discharge and 1 spray nozzle located at the center of the (jj) 42" by 310` truss conveyor (no ID).

   At a minimum, the water spray dust suppression system (Control device C01) associated with the aforementioned equipment shall incorporate the spray nozzles specifically described. More spray nozzles may be added to Control Device C01 at any time, but none of the nozzles identified previously may be omitted, deleted or removed without prior Department approval. Control Device C01 shall be equipped with strainers to prevent nozzle plugging.

   Any of the previous equipment, with the exception of the air pollution control devices, can be replaced without obtaining plan approval provided that the replacement equipment is of equal or smaller size as defined in Subpart OOO of the Federal Standards of Performance for New Stationary Sources, 40 CFR 60.670--60.676, and provided that the replacement equipment is of equivalent design and function (that is, an impact crusher may be replaced with an impact crusher, and the like). The permittee shall notify the Department prior to the replacement.

   10.  Sources incorporated in the primary crushing operation (Source P102), with the exception of the Barber-Greene 36" by 170` truss conveyor, shall comply with all requirements specified in Subpart OOO of the Federal Standards of Performance for New Stationary Sources, 40 CFR 60.670--60.676. The permittee shall comply with all applicable requirements of this Subpart as well as any other applicable Subpart of the Standards of Performance.

   11.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, Source ID P103 is a secondary crushing operation for limestone consisting of the following equipment:

   (a)  Iowa Manufacturing Co. model 3645 double impeller impact crusher (or Hazemag 1315/QL APPH impact crusher) (ID No. 100-004).

   (b)  250 tph Frog-Switch model 50CE cagemill crusher--ID No. 120-001.

   (c)  Simplicity/Diester 8` by 24` four deck screen equipped with a Telex(R) cover--ID No. 111-022.

   (d)  two General Electric GI-90 inertial air classifiers--ID Nos. 254-004 and 254-005.

   (e)  three 24" by 100` radial stacking conveyors (Producers Supply)--ID Nos. 123-020, 123-002 and 123-001.

   (f)  24" by 45` channel frame conveyor (Producers Supply)--ID No. 120-053.

   (g)  6,400 cubic foot Columbian Steel dust storage silo--ID No. 201-012.

   (h)  DCL model SOV-24-10 bulk loadout spout--ID No. 203-004.

   (i)  Universal bucket elevator--ID No. 230-006.

   (j)  400 tph Syntron F-450-C-DT feeder--ID No. 134-017.

   (k)  36" by 140` truss conveyor (GOH)--ID No. 122-003.

   (l)  30" by 92` channel frame conveyor (GOH)--ID No. 120-006.

   (m)  30" by 125` truss frame conveyor (GOH)--ID No. 122-004.

   (n)  24" by 110` mast type radial stacking conveyor (GOH)--ID No. 124-002.

   (o)  24" by 40`-2" channel frame conveyor (Producers Supply)--ID No. 120-075.

   (p)  24" by 32`-6" channel frame conveyor (Producers Supply)--ID No. 120-074.

   (q)  24" by 48`-3" channel frame conveyor (Producers Supply)--ID No. 120-076.

   (r)  24" by 15` channel frame conveyor (GOH)--ID No. 120-010.

   (s)  24" by 30` channel frame conveyor (GOH)--ID No. 120-009.

   (t)  24" by 132` truss conveyor (GOH)--ID No. 122-005.

   (u)  new 6,400 cubic foot Columbian Steel dust storage silo (no ID).

   (v)  new DCL model SOV-24-10 bulk loadout spout (no ID).

   (w)  36" diameter Eagle Iron Works pug mill (no ID).

   The air contaminant emissions from the secondary crushing operation (Source P103) shall be controlled by an 8` diameter cyclone precleaner (Control Device C103A) connected in series with an Astec model RBH-30-7-MOD fabric collector (Control Device C103E) incorporating dust pickups at each of the two inertial air classifiers, one dust pickup at the discharge end of the 24" by 132` truss conveyor, one dust pickup at the discharge end of the 30" by 92` channel frame conveyor and one dust pickup at the discharge end of the 24" by 45` channel frame conveyor; an Amerex RP-12-429-D6 fabric collector (Control Device C103B) incorporating one dust pickup at the discharge end of the 36" by 140` truss conveyor, one dust pickup at the receiving end of the 30" by 92` channel frame conveyor, one dust pickup at the Hazemag crusher, two dust pickups at the Simplicity/Diester 8` by 24` four deck screen, one dust pickup at the discharge end of the Producers Supply 24" by 32`-6" channel frame conveyor, one dust pickup at the receiving end of the Producers Supply 24" by 32`-6" channel frame conveyor, one dust pickup at the Frog-Switch cagemill crusher, one dust pickup at the receiving end of the 24" by 15` channel frame conveyor, one1 dust pickup at the receiving end of the Producers Supply 24" by 40`-2" channel frame conveyor, one dust pickup at the receiving end of the 24" by 30` channel frame conveyor, one dust pickup at the receiving end of the Producers Supply 24" by 48`-3" channel frame conveyor, one dust pickup at the receiving end of the 24" by 132` truss conveyor, one dust pickup at the discharge end of the 24" by 132` truss conveyor; dust pickups at each of the two 6,400 cubic foot Columbian Steel dust storage silos (new and existing), one dust pickup at the Universal bucket elevator and dust pickups at each of the two DCL model SOV-24-10 bulk loadout spouts (new and existing); and water spray dust suppression nozzles (Control Device C01) at the Hazemag impact crusher discharge and at each stacking conveyor. Additional dust pickup points and dust suppression nozzles may be added at any time but none of the pickup points or nozzles identified herein may be omitted, deleted or removed without Departmental approval. Control Device C01 shall be equipped with strainers to prevent nozzle plugging.

   Any of the previous equipment, with the exception of the air pollution control devices and any associated engines or generators, can be replaced without obtaining plan approval provided that the replacement equipment is of equal or smaller size as defined in Subpart OOO of the Federal Standards of Performance for New Stationary Sources, 40 CFR 60.670--60.676, and provided that the replacement equipment is of equivalent design and function (that is, an impact crusher may be replaced with an impact crusher, and the like). The permittee shall notify the Department prior to the replacement.

   12.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, material shall not be transferred into, or removed from, the aggregate storage silos incorporated in the limestone conveying operation (Source P105) unless the water spray dust suppression system (Control Device C01) controlling the silo and associated loadout spout is operating.

   13.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, all open-topped trucks hauling aggregate from the aggregate storage silos incorporated in the limestone conveying operation (Source P105) shall have their loads securely tarped and a sign or signs stating the existence of this requirement shall be posted in a prominent location near the storage silo.

   14.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, Source P105 is a limestone conveying operation consisting of the following equipment:

   (a)  30" by 180` truss conveyor (GOH)--ID No. 122-011.

   (b)  30" by 245` channel frame/truss conveyor--ID No. 120-050.

   (c)  36" by 12` underground belt feeder--ID No. 133-011.

   (d)  30" belt tripper--No. 126-001.

   (e)  30" by 210` channel frame/truss conveyor (no ID).

   (f)  30" by 12" underground belt feeder (no ID).

   (g)  two 30" by 160` channel frame/truss conveyors (no IDs).

   (h)  30" by 120` channel frame/truss conveyor (no ID).

   (i)  three 200 ton aggregate storage silos and associated loadouts (no ID).

   The air contaminant emissions from Source P105 shall be controlled by a water spray dust suppression system (Control Device C01) incorporating the following spray nozzles:

   (a)  one spray nozzle located at the discharge of the (f) 30" by 12" underground belt feeder (no ID).

   (b)  one spray nozzle located at the discharge of the 36" by 12` underground belt feeder--ID No. 133-011.

   (c)  one spray nozzle located at the discharge of the 30" by 245` channel frame/truss conveyor--ID No. 120-050.

   (d)  one spray nozzle (two total) located at the discharge of each of the (g) two 30" by 160` channel frame/truss conveyors (no IDs).

   (e)  one spray nozzle located at the discharge of the (h) 30" by 120` channel frame/truss conveyor (no ID).

   (f)  one spray nozzle (three total) located at the loadout of each of the (i) three 200 ton aggregate storage silos (no ID).

   At a minimum, the water spray dust suppression system (Control device C01) associated with the aforementioned equipment shall incorporate the spray nozzles specifically described. More spray nozzles may be added to Control Device C01 at any time, but none of the nozzles identified above may be omitted, deleted or removed without prior Department approval. Control Device C01 shall be equipped with strainers to prevent nozzle plugging.

   15.  Sources incorporated in the limestone conveying operation (Source P105) shall comply with all requirements specified in Subpart OOO of the Federal Standards of Performance for New Stationary Sources, 40 CFR 60.670--60.676. The permittee shall comply with all applicable requirements of this Subpart as well as any other applicable Subpart of the Standards of Performance.

   16.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, there shall be no visible fugitive air contaminant emissions at any time from either of the dump hoppers incorporated in the railcar loading/unloading operation (Source P107) or from the railcars while the railcars are in the process of being loaded or unloaded.

   17.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the total amount of aggregate loaded into railcars in the railcar loading/unloading operation (Source P107) shall not exceed 500,000 tons in any 12-consecutive month period. Additionally, the total amount of aggregate loaded into and unloaded from railcars in the railcar loading/unloading operation shall not exceed 1,200,000 tons in any 12-consecutive month period.

   18.  The permittee shall maintain comprehensive and accurate records of the amount of material loaded into railcars and the amount of material unloaded from railcars in the railcar loading/unloading operation (Source P107) each month.

   These records shall be retained for a minimum of 5 years and shall be made available to the Department upon request.

   19.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, the 4,200,000 gallon storage tank incorporated in the oil/liquid asphalt operation (Source P108) shall not be used to store any material other than liquid asphalt nor shall any material ever be stored in the storage tank which has a vapor pressure in excess of 1.5 psi under actual storage conditions.

   20.  Under the BAT requirements of 25 Pa. Code §§ 127.1 and 127.12, Source P108 is a liquid asphalt and recycled/reprocessed oil storage facility comprised of two 4,200,000 gallon (100,000 barrel) liquid asphalt storage tanks, a 1,512,000 gallon (36,000 barrel) liquid asphalt storage tank, a 1,512,000 gallon (36,000 barrel) reprocessed/recycled oil storage tank, a two-bay truck loading rack and a six-station railcar unloading rack.

   21.  The two 4,200,000 gallon storage tanks incorporated in the oil/liquid asphalt operation (Source P108) shall comply with all requirements specified in Subpart Kb of the Federal Standards of Performance for New Stationary Sources, 40 CFR 60.110b--60.117b. The permittee shall comply with all applicable requirements of this Subpart as well as any other applicable Subpart of the Standards of Performance.

[Continued on next Web Page]



No part of the information on this site may be reproduced for profit or sold for profit.

This material has been drawn directly from the official Pennsylvania Bulletin full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.