Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 54 Pa.B. 5070 (August 3, 2024).

25 Pa. Code § 102.4. Erosion and sediment control requirements.

§ 102.4. Erosion and sediment control requirements.

 (a)  For agricultural plowing or tilling activities or for animal heavy use areas, the following erosion and sediment control requirements apply:

   (1)  The implementation and maintenance of erosion and sediment control BMPs are required to minimize the potential for accelerated erosion and sedimentation, including for those activities which disturb less than 5,000 square feet (464.5 square meters).

   (2)  Written E&S Plans are required for the following activities that disturb 5,000 square feet (464.5 square meters) or more of land:

     (i)   Agricultural plowing or tilling activities.

     (ii)   Animal heavy use areas.

   (3)  The landowner, and any lessee, renter, tenant or other land occupier, conducting or planning to conduct agricultural plowing or tilling activities, or operating an animal heavy use area, are jointly and individually responsible for developing a written E&S Plan and implementing and maintaining BMPs, including those identified in the E&S Plan.

   (4)  The E&S Plan must include cost-effective and reasonable BMPs designed to minimize the potential for accelerated erosion and sedimentation from agricultural plowing or tilling activities and animal heavy use areas.

     (i)   For agricultural plowing or tilling activities, the E&S Plan must, at a minimum, limit soil loss from accelerated erosion to the soil loss tolerance (T) over the planned crop rotation.

     (ii)   For agricultural plowing and tilling activities that will occur on fields with less than 25% plant cover or crop residue cover and within 100 feet of a river, or perennial or intermittent stream, additional BMPs shall be implemented to minimize accelerated erosion and sedimentation.

     (iii)   For animal heavy use areas, the E&S Plan must identify BMPs to minimize accelerated erosion and sedimentation. BMPs and their design standards are listed in the current amended and updated version of the appropriate National Resources Conservation Service conservation practice standards such as Heavy Use Area Protection, Critical Area Planting, Fencing, Wastewater Treatment Strip, Constructed Wetland, Use Exclusion, Animal Trails and Walkways, Diversions and Roof Runoff Structure.

   (5)  The E&S Plan must contain plan maps that show the location of features including surface waters of this Commonwealth, and drainage patterns, field and property boundaries, buildings and farm structures, animal heavy use areas, roads and crossroads, and BMPs; soils maps; and a description of BMPs including animal heavy use area practices and procedures, tillage systems, schedules, and crop rotations. The plan must be consistent with the current conditions and activities on the agricultural operation.

   (6)  The E&S Plan must contain an implementation schedule. The plan shall be implemented according to the schedule, and the BMPs shall be operated and maintained as long as there are agricultural plowing or tilling activities or animal heavy use areas, on the agricultural operation.

   (7)  The portion of a conservation plan that identifies BMPs utilized to minimize accelerated erosion and sedimentation from agricultural plowing or tilling activities, or from operation of animal heavy use areas, may be used to satisfy the E&S Plan requirements of this subsection if it meets the requirements of paragraphs (4)—(6).

   (8)  The E&S Plan shall be available for review and inspection at the agricultural operation.

   (9)  Nothing in this section negates the requirements under other provisions of this chapter, such as those applicable to construction activities.

 (b)  For earth disturbance activities other than agricultural plowing or tilling or animal heavy use areas, the following erosion and sediment control requirements apply:

   (1)  The implementation and maintenance of E&S BMPs are required to minimize the potential for accelerated erosion and sedimentation, including those activities which disturb less than 5,000 square feet (464.5 square meters).

   (2)  A person proposing earth disturbance activities shall develop and implement a written E&S Plan under this chapter if one or more of the following criteria apply:

     (i)   The earth disturbance activity will result in a total earth disturbance of 5,000 square feet (464.5 square meters) or more.

     (ii)   The person proposing the earth disturbance activities is required to develop an E&S Plan under this chapter or under other Department regulations.

     (iii)   The earth disturbance activity, because of its proximity to existing drainage features or patterns, has the potential to discharge to a water classified as a High Quality or Exceptional Value water under Chapter 93 (relating to water quality standards).

   (3)  The E&S Plan shall be prepared by a person trained and experienced in E&S control methods and techniques applicable to the size and scope of the project being designed.

   (4)  Unless otherwise authorized by the Department or conservation district after consultation with the Department, earth disturbance activities shall be planned and implemented to the extent practicable in accordance with the following:

     (i)   Minimize the extent and duration of the earth disturbance.

     (ii)   Maximize protection of existing drainage features and vegetation.

     (iii)   Minimize soil compaction.

     (iv)   Utilize other measures or controls that prevent or minimize the generation of increased stormwater runoff.

   (5)  The E&S Plan must contain drawings and narrative which describe the following:

     (i)   The existing topographic features of the project site and the immediate surrounding area.

     (ii)   The types, depth, slope, locations and limitations of the soils.

     (iii)   The characteristics of the earth disturbance activity, including the past, present and proposed land uses and the proposed alteration to the project site.

     (iv)   The volume and rate of runoff from the project site and its upstream watershed area.

     (v)   The location of all surface waters of this Commonwealth which may receive runoff within or from the project site and their classification under Chapter 93.

     (vi)   A narrative description of the location and type of perimeter and onsite BMPs used before, during and after the earth disturbance activity.

     (vii)   A sequence of BMP installation and removal in relation to the scheduling of earth disturbance activities, prior to, during and after earth disturbance activities that ensure the proper functioning of all BMPs.

     (viii)   Supporting calculations and measurements.

     (ix)   Plan drawings.

     (x)   A maintenance program which provides for the operation and maintenance of BMPs and the inspection of BMPs on a weekly basis and after each stormwater event, including the repair or replacement of BMPs to ensure effective and efficient operation. The program must provide for completion of a written report documenting each inspection and all BMP repair, or replacement and maintenance activities.

     (xi)   Procedures which ensure that the proper measures for the recycling or disposal of materials associated with or from the project site will be undertaken in accordance with this title.

     (xii)   Identification of the naturally occurring geologic formations or soil conditions that may have the potential to cause pollution during earth disturbance activities and include BMPs to avoid or minimize potential pollution and its impacts from the formations.

     (xiii)   Identification of potential thermal impacts to surface waters of this Commonwealth from the earth disturbance activity including BMPs to avoid, minimize or mitigate potential pollution from thermal impacts.

     (xiv)   The E&S Plan shall be planned, designed and implemented to be consistent with the PCSM Plan under §  102.8 (relating to PCSM requirements). Unless otherwise approved by the Department, the E&S Plan must be separate from the PCSM Plan and labeled ‘‘E&S’’ or ‘‘Erosion and Sediment Control Plan’’ and be the final plan for construction.

     (xv)   Identification of existing and proposed riparian forest buffers.

   (6)  To satisfy the antidegradation implementation requirements in §  93.4c(b) (relating to implementation of antidegredation requirements), for an earth disturbance activity that requires a permit under this chapter and for which any receiving surface waters of this Commonwealth is classified as High Quality or Exceptional Value under Chapter 93, the person proposing the activity shall, in the permit application, do the following:

     (i)   Evaluate and include nondischarge alternatives in the E&S Plan, unless a person demonstrates that nondischarge alternatives do not exist for the project.

     (ii)   If the person makes the demonstration in subparagraph (i) that nondischarge alternatives do not exist for the project, the E&S Plan must include ABACT, except as provided in §  93.4c(b)(1)(iii).

     (iii)   For purposes of this chapter, nondischarge alternatives and ABACT and their design standards are listed in the Erosion and Sediment Pollution Control Program Manual, Commonwealth of Pennsylvania, Department of Environmental Protection, No. 363-2134-008 (April 2000), as amended and updated.

   (7)  The Department may approve alternative BMPs which will maintain and protect existing water quality and existing and designated uses.

   (8)  The E&S Plan, inspection reports and monitoring records shall be available for review and inspection by the Department or the conservation district at the project site during all stages of the earth disturbance activity.

   (9)  Upon complaint or site inspection, the Department or conservation district may require that the E&S Plan be submitted for review and approval to ensure compliance with this chapter.

 (c)  The Department may require, or the conservation district after consultation with the Department may require, other information necessary to adequately review a plan, or may require alternative BMPs, on a case-by-case basis, when necessary to ensure the maintenance and protection of water quality and existing and designated uses.

 (d)  A person proposing or conducting an earth disturbance activity shall obtain the other necessary permits and authorizations from the Department or conservation district, related to the earth disturbance activity, before commencing the earth disturbance activity.

 (e)  Persons proposing an earth disturbance activity that requires permit coverage under §  102.5 (relating to permit requirements) shall have permit coverage prior to commencing the earth disturbance activity.

Authority

   The provisions of this §  102.4 amended under sections 5 and 402 of The Clean Streams Law (35 P. S. § §  691.5 and 691.402); sections 1917-A and 1920-A of The Administrative Code of 1929 (71 P. S. § §  510-17 and 510-20); and section 11(2) of the Conservation District Law (3 P. S. §  859(2)).

Source

   The provisions of this §  102.4 adopted September 29, 1972, effective October 30, 1972, 2 Pa.B. 1796; amended June 3, 1977, effective June 20, 1977, 7 Pa.B. 1478; amended February 3, 1978, effective February 20, 1978, 8 Pa.B. 288; amended December 30, 1999, effective January 1, 2000, 30 Pa.B. 111; amended August 20, 2010, effective November 19, 2010, 40 Pa.B. 4861. Immediately preceding text appears at serial pages (336605) to (336608).

Notes of Decisions

   Compliance Required

   Failure of the DER to notify operators of the requirements for erosion control plans until one and a half years after adoption of the regulations did not excuse an operator from compliance. Department of Environmental Resources v. Federal Oil and Gas Company, 73 Pa. D.&C.2d 148 (1975).

   Controlling Erosion

   The company was required to implement and maintain adequate erosion and sedimentation controls at the site so as to prevent accelerated erosion and sedimentation. Harbison-Walker Refractories v. Department of Environmental Protection, 1996 EHB 116.

   Under this regulation, control measures and regulations are clearly required, even in development activities where permits are not necessary and safeguards are clearly available to protect against possible adverse secondary erosion and sedimentation effects in a watershed. Community College of Delaware County v. Fox, 342 A.2d 468 (Pa. Cmwlth. 1975).

   Limited Liability

   An independent drilling contractor who prepared the gas well drilling site for the lessee of an oil and gas lease was not a person engaged in earth moving activities and cannot be charged with failure to develop and implement an erosion control plan, but would be held jointly and severally liable for discharges of oil and drilling fines from the gas well operation site. Department of Environmental Resources v. Federal Oil and Gas Company, 73 Pa. D. & C.2d 148 (1975).

   Stormwater

   Subdivision developer, while engaged in land development activities, had a duty to properly manage storm water runoff. This duty included compliance with a governmental district’s request to provide a storm water management plan to enable the township to properly reconstruct a road. Frisch v. Penn Township, 662 A.2d 1166 (Pa. Cmwlth. 1995); appeal denied 684 A.2d 559 (Pa. 1996).

Cross References

   This section cited in 25 Pa. Code §  102.5 (relating to permit requirements); 25 Pa. Code §  102.6 (relating to permit applications and fees); 25 Pa. Code §  102.7 (relating to permit termination); 25 Pa. Code §  102.8 (relating to PCSM requirements); and 25 Pa. Code §  102.14 (relating to riparian buffer requirements).



No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.