Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 54 Pa.B. 5070 (August 3, 2024).

28 Pa. Code § 205.61. Heating requirements for existing construction.

MECHANICAL AND ELECTRICAL REQUIREMENTS


§ 205.61. Heating requirements for existing construction.

 (a)  The heating system shall comply with local and State codes. If there is a conflict, the more stringent requirements shall apply.

 (b)  Exposed heating pipes, hot water pipes or radiators in rooms and areas used by residents or within reach of residents, shall be covered or protected to prevent injury or burns to residents. This includes hot water or steam piping above 125°F.

Authority

   The provisions of this §  205.61 amended under sections 102, 201(12), 601, 801.1 and 803 of the Health Care Facilities Act (35 P.S. § §  448.102, 448.201(12), 448.601, 448.801a and 448.803); and section 2102(a) and (g) of The Administrative Code of 1929 (71 P.S. §  532(a) and (g)).

Source

   The provisions of this §  205.61 adopted August 29, 1975, effective September 1, 1975, 5 Pa.B. 2233; amended January 31, 1987, effective July 1, 1987, 17 Pa.B. 514; amended July 23, 1999, effective July 24, 1999, 29 Pa.B. 3999; amended December 23, 2022, effective July 1, 2023, 52 Pa.B. 8065. Immediately preceding text appears at serial pages (258361) to (258362).



No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.