Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 53 Pa.B. 8238 (December 30, 2023).

34 Pa. Code § 45.15. Machine control and feed.

§ 45.15. Machine control and feed.

 (a)  Except in sawmills, a mechanical or electrical power control shall be provided at each machine which enables the operator to cut off the power or stop the feed without leaving his position at the point of operation.

 (b)  If practicable, push sticks shall be provided and shall be used for pushing short or narrow pieces through hand-fed saws. If practicable, push blocks shall be provided and shall be used for pushing short pieces over hand-fed revolving cutters. Push sticks or push blocks shall not be required on power-fed machines or where a succession of short or narrow pieces is being pushed through.



No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.