Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 53 Pa.B. 8238 (December 30, 2023).

49 Pa. Code § 6.2. Definitions.

§ 6.2. Definitions.

 The following words and terms, when used in this chapter, have the following meanings, unless the context clearly indicates otherwise:

   ANSI—The American National Standards Institute.

   ASME—The American Society of Mechanical Engineers.

   Act—The Crane Operator Licensure Act (63 P. S. § §  2400.101—2400.2103).

   Board—The State Board of Crane Operators.

   Certification—Certification from the NCCCO, or another organization found by the Board to offer:

     (i)   A testing and certification program equivalent to NCCCO and meeting the applicable requirements of ASME B 30.

     (ii)   The accreditation requirements of the NCCA or ANSI.

   Certifying organization—The NCCCO, or another organization approved by the Board to issue certification.

   Coal mining or coal mining operations—The extraction of bituminous coal, lignite or anthracite from natural deposits in nonliquid form, or if in liquid form, with workers underground, by any means or method, and the work of preparing coal so extracted.

   Commissioner—The Commissioner of Professional and Occupational Affairs within the Department.

   Conviction

     (i)   An ascertainment of guilt of the accused and judgment thereon by a court, and includes a disposition of a criminal proceeding under Pennsylvania law, or any similar disposition under the laws of another jurisdiction, by a plea of guilty, guilty but mentally ill, or nolo contendere; or a verdict of guilty, or guilty but mentally ill.

     (ii)   The term does not include an adjudication of delinquency under 42 Pa.C.S. Chapter 63 (relating to Juvenile Act).

   Crane—A power-operated hoisting machine that has a power-operated winch, load line and boom moving laterally by the rotation of the machine on a carrier or base which has a manufacturer’s rated maximum lifting capacity of 15 tons or more as specified in ASME Volumes B 30.3 and B 30.5, and any successor volumes.

     (i)   The term includes:

       (A)   A derrick.

       (B)   A crawler crane.

       (C)   A wheel-mounted crane of both truck and self-propelled wheel type.

       (D)   A tower crane, which has a manufacturer’s rated maximum lifting capacity of 10 meter tons or more, as specified in the applicable ASME B 30 volume.

     (ii)   The term does not include:

       (A)   A crane or drag line used in coal mining operations.

       (B)   A forklift.

       (C)   A digger derrick truck.

       (D)   An aircraft.

       (E)   A bucket truck.

       (F)   A vehicle or machine not having a power-operated winch.

       (G)   A tow truck or wrecking crane when used for towing or vehicle recovery.

       (H)   A locomotive crane.

       (I)   A crane used in longshore operations or other intermodal operations.

       (J)   A crane used in manufacturing applications.

   Crane operator—An individual licensed by the Board to operate a crane.

   Declaration—A written designation for a license issued under §  6.22 or §  6.23 (relating to licensure without certification by practical examination; and licensure without certification by experience) specifying the type of crane that a licensee is authorized to operate.

   Department—The Department of State of the Commonwealth.

   Engage in the operation of a crane or operate a crane—To perform a physical function related to the activation or movement of a crane, and encompassing the use and manipulation of the control mechanisms that direct the movement and hoisting functions of a crane.

   Immediate supervision—Circumstances in which the crane operator is in the immediate area of the trainee, within visual sighting distance and able to effectively communicate with the trainee.

   Intermodal operations or intermodal services

     (i)   Receiving, handling, holding, consolidation, loading or delivery of an intermodal container, as defined in 29 CFR 1917.2 (relating to definitions), at a facility other than a marine terminal.

     (ii)   The term does not include:

       (A)   The construction, alteration, service, repair or improvement of real estate appurtenant to a railroad or trucking terminal.

       (B)   The repair, service or installation of tangible personal property appurtenant to a railroad or trucking terminal.

       (C)   The assembly, fabrication, installation or arrangement of parts or components of a machine, fixture, transportation improvement to real estate or building, whether for the purpose of a fitting, adjustment, refinement or test as a temporary or preliminary condition; or as a final, permanent or completed work or product.

   Lift director—An individual who directly oversees the work being performed by a crane.

   Longshore operations

     (i)   Receiving, handling, holding, consolidation, loading or delivery of waterborne shipments at a marine terminal as that term is defined in 29 CFR 1917.2.

     (ii)   The term does not include:

       (A)   The construction, alteration, service, repair or improvement of real estate appurtenant to a marine terminal.

       (B)   The repair, service or installation of tangible personal property appurtenant to a marine terminal.

       (C)   The assembly, fabrication, installation or arrangement of parts or components of a machine, fixture, transportation improvement to real estate, or building, whether for the purpose of a fitting, adjustment, refinement or test as a temporary or preliminary condition; or as a final, permanent or completed work or product.

   Manufacturing application or manufacturing or manufacture

     (i)   The performance of manufacturing, fabricating, compounding, processing or other operations, engaged in as a business, which place any tangible personal property in a form, composition or character different from that in which it is acquired whether for sale or use by the manufacturer.

     (ii)   The term includes every operation commencing with the first production stage and ending with the completion of tangible personal property having the physical qualities (including packaging, if any, passing to the ultimate consumer) which it has when transferred by the manufacturer to another.

     (iii)   The terms ‘‘manufacturing application,’’ ‘‘manufacturing’’ or ‘‘manufacture’’ do not include:

       (A)   The construction, alteration, service, repair or improvement of real estate.

       (B)   The repair, service or installation of tangible personal property.

       (C)   The assembly, fabrication, installation or arrangement of parts or components of a machine, fixture, transportation improvement to real estate or building, whether for the purpose of a fitting, adjustment, refinement or test as a temporary or preliminary condition; or as a final, permanent or completed work or product.

   NCCA—National Commission for Certifying Agencies.

   NCCCO—National Commission for the Certification of Crane Operators.

   OSHA—The United States Occupational Safety and Health Administration.

   Trainee—An individual who has not been issued a license under this act or obtained certification but who is authorized to operate a crane as set forth in section 501(c) of the act (63 P. S. §  2400.501(c)), and §  6.13 (relating to qualifications and supervision of trainees) when under the immediate supervision of a crane operator.

   Work of preparing the coal

     (i)   The breaking, crushing, sizing, cleaning, washing, drying, mixing, storing and loading of bituminous coal, lignite or anthracite, and other work of preparing the coal as is usually done by the operator of a coal mine.

     (ii)   The term does not include:

       (A)   The construction, alteration, service, repair or improvement of real estate appurtenant to a coal mine.

       (B)   The repair, service or installation of tangible personal property appurtenant to a coal mine.

       (C)   The assembly, fabrication, installation or arrangement of parts or components of a machine, fixture, transportation improvement to a coal mine or building, whether for the purpose of a fitting, adjustment, refinement or test as a temporary or preliminary condition; or as final, permanent or completed work or product.



No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.