§ 129.102. Emission standards.
An owner or operator of a facility subject to this section, § § 129.101 and 129.103129.107 shall limit VOC emissions from wood furniture manufacturing operations by:
(1) Applying either waterborne topcoats or a combination of sealers and topcoats and strippable spray booth coatings with a VOC content equal to or less than the standards specified in Table IV:
Emission Limits of VOC for Wood Furniture
Manufacturing Sealers, Topcoats and Strippable Spray
Booth Coatings As Applied, in Pounds of VOC Per
Pound of Coating Solids (kg VOC/kg of Coating
Solids), by Category
(1) Waterborne Topcoats 0.8 (2) High solids coating systems Sealer 1.9 Topcoat 1.8 (3) Acid-cured alkyd amino systems (i) Acid-cured alkyd amino sealer 2.3 Acid-cured alkyd amino conversion varnish topcoat 2.0 (ii) Other sealer 1.9 Acid-cured alkyd amino conversion varnish topcoat 2.0 (iii) Acid-cured alkyd amino sealer 2.3 Other topcoat 1.8 (4) Waterborne strippable spray booth coating 0.8
(2) Using an emissions averaging program which meets the requirements in § 129.107 (relating to special provisions for facilities using an emissions averaging approach).
(3) Using a control system that will achieve a reduction in emissions equivalent to 0.8 lb VOC/lb solids for topcoats or 1.8 lbs VOC/lb solids for topcoats and 1.9 lbs VOC/lb solids for sealers.
(4) Using a combination of the methods specified in paragraphs (1)(3).
The provisions of this § 129.102 issued under section 5(a)(1) of the Air Pollution Control Act (35 P.S. § 4005(a)(1)).
The provisions of this § 129.102 adopted June 9, 2000, effective June 10, 2000, 30 Pa.B. 2995.
This section cited in 25 Pa. Code § 121.1 (relating to definitions); 25 Pa. Code § 129.52c (relating to control of VOC emissions from flat wood paneling surface coating processes); 25 Pa. Code § 129.91 (relating to control of major sources of NOx and VOCs); 25 Pa. Code § 129.96 (relating to applicability); 25 Pa. Code § 129.101 (relating to general provisions and applicability); 25 Pa. Code § 129.103 (relating to work practice standards); 25 Pa. Code § 129.104 (relating to compliance procedures and monitoring requirements); 25 Pa. Code § 129.105 (relating to recordkeeping requirements); 25 Pa. Code § 129.107 (relating to special provisions for facilities using an emissions averaging approach); 25 Pa. Code § 129.111 (relating to applicability).
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.