Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 54 Pa.B. 1032 (February 24, 2024).

67 Pa. Code § 171.150. Use of portable emergency warning devices.

§ 171.150. Use of portable emergency warning devices.

 In accordance with 75 Pa.C.S. §  4530(b) (relating to portable emergency warning devices), when a bus is disabled or stopped for more than 10 minutes upon a highway, the driver shall display at least three portable warning devices. These portable warning devices shall be displayed as required by §  167.8 (relating to display).

Authority

   The provisions of this §  171.150 issued under the Vehicle Code, 75 Pa.C.S. § §  4103, 4551—4553 and 6103.

Source

   The provisions of this §  171.150 adopted September 13, 1996, effective September 14, 1996, 26 Pa.B. 4411.


APPENDIX A


 1. For a summary or other explanation of any Federal standard, write the Director, Office of the Federal Register, National Archives and Records Administration, Washington, D.C. 20408. The Code of Federal Regulations publication sales are handled exclusively by the Superintendent of Documents.

 United States Government Printing Office
Superintendent of Documents
Washington, D.C. 20402


49 CFR 393Parts and Accessories Necessary for Safe Operation
49 CFR 396Inspection, Repair and Maintenance
49 CFR 567.7Requirements for Persons Who Alter Certified Vehicles
49 CFR 568.8 Requirements For Persons Who Alter Certified Vehicles
49 CFR 569 Regrooved Tires
49 CFR 571 Federal Motor Vehicle Safety Standards (FMVSS)
 Standard 108 Lamps, Reflective Devices and Associated Equipment
 Standard 111 Rearview Mirrors
 Standard 117 Retreaded Pneumatic Tires
 Standard 119 New Pneumatic Tires For Vehicles Other Than Passenger Cars
 Standard 120 Tire Selection And Rims For Motor Vehicles Other Than Passenger Cars
 Standard 125 Warning Devices
 Standard 131 School Bus Pedestrian Safety Devices
 Standard 205 Glazing Materials
 Standard 208 Occupant Crash Protection
 Standard 209 Seat Belt Assemblies
 Standard 210 Seat Belt Assembly Anchorages
 Standard 213 Child Restraint Systems
 Standard 217 Bus Emergency Exits and Window Retention and Release
 Standard 222 School Bus Passenger Seating and Crash Protection
 Standard 302 Flammability of Interior Materials
49 CFR 581 Bumper Standard

 2. To order SAE handbooks or manuals or for additional SAE information, write:

 Society of Automotive Engineers, Inc. (SAE)
400 Commonwealth Drive
Warrendale, PA 15096-0001
(412) 776-4970


 Standard J20c Coolant System Hoses
 Standard J56 Electrical Generating System (Alternator Type) Performance Curve and Test Procedure
 Standard J180b Electrical Charging Systems for Construction and Industrial Machinery
 Standard J186a Supplemental High Mounted Stop and Rear Turn Signal Lamps
 Standard J377 Performance of Vehicle Traffic Horns
 Standard J381 Windshield Defrosting Systems Test Procedure—Trucks, Buses and Multipurpose Vehicles
 Standard J382 Windshield Defrosting Systems Performance Requirements—Trucks, Buses and Multipurpose Vehicles
 Standard J578 Color Specifications
 Standard J887a School Bus Red Signal Lamps
 Standard J994b Alarm Backup Electric Performance Test and Application
 Standard J1100 Motor Vehicle Dimensions
 Standard J1133 School Bus Stop Arm
 Standard J1292 Automobile, Truck, Truck-Tractor, Trailer and Motor Coach Wiring

 3. For additional SBMI information, write:

 School Bus Manufacturers Institute (SBMI)
Division of Truck Body and Equipment Association
7508 Ben Avon Road
Bethesda, Maryland 20817
(301) 299-8441

 Design Objectives Booklet, current edition


 Standard 001 Standard Code for Testing and Rating Automotive Bus Hot Water Heating and Ventilating Equipment

 4. For additional Underwriters Laboratories, Inc. information:

 Underwriters Laboratories, Inc.
333 Pfingsten Rd.
Northbrook, Illinois 60062
(312) 272-8800


 Standard 299 Dry Chemical Fire Extinguishers
 Standard 723 Tests for Surface Burning Characteristics of Building Materials
 Standard 1093 Halogenated Agent Fire Extinguishers

 5. For additional U.S. Department of Commerce information, write:

 United States Department of Commerce
14th and E Streets
Washington, DC 20230


 Standard PS1-83 Construction and Industrial Plywood

 6. For additional ASTM information, write:

 American Society for Testing and Materials (ASTM)
1916 Race Street
Philadelphia, Pennsylvania 19103
(215) 299-5400


 Standard B117 Standard Method of Salt Spray (Fog) Testing

 7. For additional General Services Administration Specification and Consumer Information, write:

 General Services Administration
Specification & Consumer Information
Distribution Center
Washington Navy Yard
Building 197
Washington, DC 20407

 Federal Coating Compound, Bituminous, Solvent Type, Specification Underbody (for Motor Vehicles) TT-C-520b

 8. For additional National Institute of Standards and Technology (NIST) information, write:

 National Institute of Standards and Technology
Publications and Programs Inquiries
Building 101, Room E106
Gaithersburg, MD 20899
(301) 975-3052


Federal Standard
No. 595a
Color 37038

Authority

   The provisions of this Appendix A amended under the Vehicle Code, 75 Pa.C.S. § §  4103, 4551—4553 and 6103.

Source

   The provisions of this Appendix A adopted August 19, 1983, effective August 20, 1983, 13 Pa.B. 2561; readopted December 4, 1987, effective December 5, 1987, 17 Pa.B. 5052; amended September 13, 1996, effective September 14, 1996, 26 Pa.B. 4411. Immediately preceding text appears at serial pages (122822) and (132815).

Cross References

   This appendix cited in 67 Pa. Code §  171.1 (relating to applicability); 67 Pa. Code §  171.15 (relating to bumper, front); 67 Pa. Code §  171.18 (relating to color); 67 Pa. Code §  171.20 (relating to electrical system); 67 Pa. Code §  171.23 (relating to frame); 67 Pa. Code §  171.24 (relating to fuel system); 67 Pa. Code §  171.26 (relating to heating system); 67 Pa. Code §  171.28 (relating to instruments and instrument panel); 67 Pa. Code §  171.36 (relating to tires and rims); 67 Pa. Code §  171.38 (relating to undercoating); 67 Pa. Code §  171.44 (relating to bumper, rear); 67 Pa. Code §  171.49 (relating to defrosters); 67 Pa. Code §  171.50 (relating to doors and emergency exits); 67 Pa. Code §  171.51 (relating to fire extinguisher); 67 Pa. Code §  171.57 (relating to insulation); 67 Pa. Code §  171.58 (relating to interior); 67 Pa. Code §  171.59 (relating to lamps and signals); 67 Pa. Code §  171.60 (relating to metal treatment); 67 Pa. Code §  171.68 (relating to seat belts); 67 Pa. Code §  171.69 (relating to seats and crash barriers); 67 Pa. Code §  171.75 (relating to undercoating); 67 Pa. Code §  171.78 (relating to windows); 67 Pa. Code §  171.81 (relating to wiring); 67 Pa. Code §  171.82 (relating to backup alarm); 67 Pa. Code §  171.93 (relating to securement devices and safety restraints); 67 Pa. Code §  171.99 (relating to restraining devices); 67 Pa. Code §  171.106 (relating to power lift uprights, barriers and chair or elevator-type lifts through the floor); 67 Pa. Code §  171.122 (relating to fire extinguisher); and 67 Pa. Code §  171.132 (relating to fire extinguisher).

APPENDIX B
NATIONAL SCHOOL BUS YELLOW


 The color known as National School Bus Yellow was designated as such by the 1939 National Conference on School Bus Standards. The National Bureau of Standards of the United States Department of Commerce assisted in developing this color and its colorimetric specifications, as follows:


C.I.E.
Chromaticity Coordinates
Daylight
Reflectance
Y (%)
Dominant
Wavelength
(in millicrons)
Excitation
Purity
P (%)
xymax.std.min.max.std.min.max.std.min.
.5211.454941.40.584.5583.5582.593.789.0

 At the 1980 Conference the colors in use were reviewed. A color standard was selected, slightly different from the above, and specific tolerances were chosen. These tolerances will insure a continuity of appearance from school bus to school bus, and within the same school bus when different elements are finished or refinished at different times. Specification for the Standard Color, with light and dark tolerances (Upper and Low Reflectances) are shown below in tabular form.

SPECIFICATION FOR STANDARD COLOR


For Source C
CIE Chromaticity
Coordinates
Reflectance
Y (%)
Reflectance tolerances
xyUpper
Lower
.5089.440840.14%41.77%38.45%



Source

   The provisions of this Appendix B adopted August 19, 1983, effective August 20, 1983, 13 Pa.B. 2561; readopted December 4, 1987, effective December 5, 1987, 17 Pa.B. 5052. Immediately preceding text appears at serial page (83769).

Cross References

   This appendix cited in 67 Pa. Code §  171.18 (relating to color); 67 Pa. Code §  171.47 (relating to color); 67 Pa. Code §  171.55 (relating to identification); 67 Pa. Code §  171.124 (relating to identification); and 67 Pa. Code §  171.134 (relating to identification).





No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.